How do I replace the Dome Gen 2 PCB?

Open the interactive guide to see each step on your Dome.

Please work through these troubleshooting steps in order.

1. Remove the display

   Let the oven cool completely, then remove the display.

   Have the replacement PCB, a T6 Torx screwdriver and a fully charged battery ready.

2. Unplug the PCB

   Note where each plug goes. Press the safety clip underneath each plug and disconnect all three plugs behind the PCB.

3. Replace the PCB

   Unscrew the PCB with a T6 Torx screwdriver. Secure the new PCB, then reconnect all three plugs in their original positions.

4. Refit the display

   Refit the display with a fully charged battery.

If you have any further problems, contact the Gozney Team.